Signals Synergy: Enable Designs and Design Tables for Materials from Synergy Configuration

For Administrators only.

1️⃣ Signals Synergy Configuration ➡ select  [Designs & Materials]
2️⃣ Designs – Design Definition & Table section ➡ select Enable
3️⃣ Designs – Design Definition & Table section ➡ select Include in Design Table
4️⃣ Designs – Design Definition & Table section ➡ select [Save Settings]

Supporting Knowledge

Enabling will allow the use of Designs and Designs Tables for Compounds.

Not all pre-set properties are required to be included in the Design Table, and desired properties can be included or excluded as needed with use of the checkboxes.

Note: The above steps can be applied to both the Compounds and Normalized Compounds Material types. The instructions are identical; however, the same subsection should be selected under Normalized Compounds in the Material Type side setting pane, rather than the Compounds subsection pictured above.