For Administrators only.
*Required.
1️⃣ Signals Synergy Configuration ➡ select
| |
| 2️⃣ Material Types pane ➡ select Reference Tables ➡ select Design/Compound/Batch | |
| 3️⃣ Compounds – Refence Table section ➡ select | |
4️⃣ Compounds – Create New Refence Table Field section ➡ type/select
| |
| 5️⃣ Compounds – Create New Refence Table Field section ➡ select |
Supporting Knowledge
Three types of Reference Tables are available: Design, Compound, and Batch. All three can be enabled and edited in the same way, and the same configuration settings are provided for their properties.
Only user-created fields can be modified. Modifications are made by double-clicking the field name after creation, and changes can be applied as described above.
Additionally, reference table fields can be reordered by clicking and dragging the [move field] hamburger icon to the desired position in the table.
Note: The above steps can be applied to both the Compounds and Normalized Compounds Material types. The instructions are identical; however, the same subsection should be selected under Normalized Compounds in the Material Type side setting pane, rather than the Compounds subsection pictured above.
Comments
0 comments
Article is closed for comments.