Signals BioDesign: How to activate BioDesign for the first time in a tenant?

When integrating Biodesign into a Signals tenant, you must first enable this application. In this article, you'll find a step-by-step guide on how to perform this action.

Note: This procedure requires access to the configuration menu, so it must be performed by a system administrator. 

1. Access to Signals. 

2. Go to the configuration menu. 

3. Select the option "BioDesign Settings".
   

4. If this is your first time accessing this section, Signals will prompt you to “Initialize BioDesign,” so you must select the “Initialize” option.
   

   Note: This is a one-time action and cannot be undone.

5. Once BioDesign has been initiated, you will see the following screen.
   

6. Now, to enable BioDesign, make sure you've selected the “Activation” option (1) in the left-hand side menu and toggle the switch in this section until it turns green (2).
   

Once you have completed this process, you will have successfully enabled BioDesign in your tenant.